Customized IE51 IPX123456 Integrate Turntable Nozzle Water Spray Test Chamber Touch Screen
Product Description:
Application areas:
IE51 IPX123456 Comprehensive spray test chamber is used for waterproof test of Outdoor lamps, household appliances, auto parts and other electronic and electrical products.
We can provide custom design service for the spray tester with different waterproof grade for different product, the max waterproof grade we can do is IPX8.
Equipment function:
The main function of Water Spray Chamber is to use it for electronic and electrical products, lamps, electrical cabinets, electrical components, automobiles, motorcycles and their parts and other products under simulated rain and splashing water climate conditions to affect the physical and physical properties of the products. Other related performance tests. After testing, verification is used to determine whether the performance of the product meets the requirements, so as to facilitate product design, improvement, verification and factory inspection.
x
Implementation standards:
- Comply with IEC60529:1989 +A1:1999 +A2: 2013 "Degrees of protection provided by enclosures (IP Code)",
- GB4208-2017 "Enclosure Protection Level (IP Code)" Clauses 14.2.1, 14.2.2, 14.2.3, 14.2.4 and the requirements of Figure 3 and Figure 4.
Key Features:
- Rain Test Chamber is Suitable for IPX1, IPX2, IPX3, IPX4 ,IPX5,IPX6 waterproof grade testing of products.
- The shell is made of domestic high-quality steel plates, and the surface is spray-painted, making it beautiful and durable.
- The inner box, turntable, swing tube, etc. are all made of SUS304# stainless steel plates to ensure that they will not rust after long-term use.
- Box structure; built-in water tank, recycled water; automatic control of water inflow, and low water level alarm detection
- There is a transparent observation window (made of tempered glass) on the door, and LED lighting is installed inside the box to facilitate observation of internal testing conditions.
- IPX1, 2: The drip box adopts vacuum design and is made of stainless steel; the nozzle contact position adopts a brass cone design to facilitate the installation of water spray nozzles.
- IPX1, 2: It has a compressed air drying function. After the test is completed, the excess water in the drip box can be drained out to avoid water accumulation and scaling that will block the pinholes. (Note: The user needs to provide air source)
- IPX3, 4: The swing tube is driven by a domestic high-quality stepper motor. The speed and angle of the swing tube are accurately adjustable and there is no out-of-step problem (out of step: it will cause the swing tube to move abnormally and hit the middle turntable axis, causing damage to the equipment)
- IPX 5, 6: Manufactured in accordance with the rules of IEC 60529 (as shown below):
- Filtration measures: Standard high-precision filter can effectively filter impurities in tap water; the filter element can be replaced regularly.
- Turntable drive: Using domestic high-quality stepper motors, the speed and angle can be set (adjustable) on the touch screen, accurately and steplessly adjustable within the standard range, and can automatically control forward and reverse rotation (forward and reverse rotation: suitable for belts The sample is powered on for testing to prevent winding).
- The test chamber is equipped with a sample power socket (AC220, 10A). The power on and off time of the sample power can be controlled by the program: power outage (0-999min) - power on (0-999min) - power outage (0-999min), which is suitable for samples during testing The power needs to be turned on and off.
- The test time can be set on the touch screen, and the setting range is: 0-999min (adjustable).
- The core control system uses a 7-inch touch screen + Panasonic PLC. The electrical components use imported brands such as LS and Omron. The wiring technology meets the national standards. The electrical board layout is reasonable, the wiring is firm, and the markings are clear.
- The base of the equipment is equipped with 4 movable casters with brakes for easy movement and fixation.
- The chassis is equipped with an embedded spare parts box, which contains commonly used spare parts (such as hexagonal screwdrivers, filter elements, needles, etc.) for the convenience of users to keep and use.
Specifications:
| Parameter | Value |
| Inner box size:(W*D*H) | 900*900*1050mm |
| External dimensions:(W*D*H) | 1350*3700*1920mm |
| Turntable diameter: | ￠ 600mm |
| Maximum load-bearing capacity of turntable: | 50KG |
| Turntable lifting height: | 450-750mm(Height of table top from bottom) |
| The turntable can be tilted: | 0° or 15°(horizontal direction) |
| Turntable speed: | 1 -5r/min(precisely adjustable) |
| Turntable rotation method: | Always forward rotation / alternating forward and reverse rotation / intermittent rotation |
| Flow adjustment method: | Manual adjustment is achieved using a flow meter with an adjustment panel |
| testing time: | 0-999 min |
| Total equipment mass | About 300kg |
| IPX1,2 Section-Technical Parameters |
| Drip board area: | 600*600mm |
| IPX12 Nozzle hole size: | diameter0.4mm |
| Distance between drip holes: | 20*20 mm |
| Rainfall: | IPX1=1mm/min；IPX2=3mm/min |
| Raindrop board lifting method: | Not liftable (fixed) |
| IPX3,4 Section-Technical Parameters |
| Swing tube radius size: | R400mm |
| R400 Swing tube flow: | 1.1L/min±5%(IPX3)；1.8L/min±5%(IPX4) |
| Water spray hole size: | 0.4mm |
| Spray hole spacing:: | 50mm |
| Swing tube inner diameter: | 15mm |
| Swing tube angle: | 120º(IPX3),350º(IPX4)or custom settings |
| swing tube swing speed: | 240°back and forth 4S, 720°back and forth12S (precise control) or customized |
| Water, electricity and gas parameters |
| Power supply for test samples | 220V |
| Device power/power | 220V 50Hz 3.0KW(or specified) |
| Security protection function | Leakage protection, water shortage protection, short circuit protection |
| Water source requirements | 1. Users are required to configure a water source for the equipment at the installation site, with the water pressure not less than 0.2Mpa, and install a 4-point faucet. The faucet should be no more than 2 meters away from the equipment. |
| IPX5,6 Section-Technical Parameters |
| IPX5 water spray aperture: | 6.3mm |
| IPX6 water spray aperture: | 12.5mm |
| IPX5 water spray flow: | 12.5±0.625 L/min |
| IPX6 water spray flow: | 100±5 L/min |
| Water pressure (Mpa): | adjustable |
| Spray distance: | 2.5 meters (distance between nozzle and turntable center) |
| Spray gun swing drive: | stepper motor |
Inner box pictures:
The swing pipe could be make as your size.
Customization:
1.Customized Service for Rain Test Chamber, we can make the waterproof grade for IPX1,2,3,4,5,6, even IPX7,X8.
2. The swing pipe of the water spray could be customized, we can make different diameter for you.
3. There is 4 grade of our machine,
-IPX1234 is for rain drop testing, simulating drizzling rain.
-IPX5,6 is for strong water spray, simulating rainstorm.
-IPX123456 is for Comprehensive spray.
-IPX7,8 is for water Diving level, usually is for high quality electronic equipment, such as mobile phone,camara etc.
Support and Services:
Our team of highly experienced and knowledgeable engineers are dedicated to providing top-notch technical support for our Climate Test Chamber. We offer 24/7 technical assistance to our customers via phone, email or online chat, ensuring timely resolution of any issues that may arise.
Our technical support includes:
- Installation and commissioning
- Training on operation and maintenance of the chamber
- Troubleshooting and diagnosis of any technical problems
- Remote assistance for software updates and control system adjustments
We also provide on-site technical support for complex issues that cannot be resolved remotely. Our team will work closely with you to ensure the smooth functioning of your Waterproof test machine.
Packing and Shipping:
Rain Test Chamber Packaging and Shipping
Our Rain Test Chamber is carefully packaged to ensure safe delivery to our customers. The packaging process includes the following steps:
- The Rain Test Chamber is placed in a sturdy wooden crate to protect it from any external damage during shipping.
- The crate is then wrapped with multiple layers of bubble wrap to provide extra cushioning and protection.
- The chamber is also fitted with shock-absorbing materials to further prevent any damage during transportation.
- The wooden crate is then sealed and labeled with the necessary shipping information.
We offer various shipping options to meet our customers' needs. These options include:
- Standard shipping: This option typically takes 5-7 business days for delivery.
- Expedited shipping: For urgent orders, we offer expedited shipping which takes 2-3 business days for delivery.
- International shipping: We ship our Rain Test Chamber worldwide, with estimated delivery times varying based on the destination.
Our team carefully monitors the shipping process to ensure that our Rain Test Chamber arrives safely and in a timely manner. We also provide tracking information so our customers can keep track of their shipment.
For any questions or concerns regarding the packaging and shipping of our Climate Test Chamber, please contact our customer service team at sales@infinity-machine.com
Contact us
Mobile/Whatsapp:+86-189-2293-3631
Tel:+86-(0)76987796906
https://www.tester-machine.com/
Infinity Machine International Inc
