Infinity Machine International Inc.
Machines are applied for big international labs, helping oversea customers establish quality control laboratory & send service team for installation.
Add to Cart
The Salt Spray Test Chamber is to simulate the dispersion system composed of tiny salt-containing droplets in the atmosphere, which is widely used in electronic, electrical and automobile, motorcycle, hardware, plastic, FPC soft board, and other industries after electroplating, painting, coating, anodic treatment of salt spray corrosion test to evaluate its surface corrosion resistance
| Model number | IE4490L | |
| Laboratory temperature range | RT+5℃~60℃ | |
| Pressure barrel temperature range | RT+5℃~70℃ | |
| Temperature fluctuation | ±0.5℃ | |
| Temperature uniformity | ≦1.0℃ | |
| The amount of salt spray settling | 1～3ml/h.80cm2 | |
| Spray pressure | 1.00±0.01kgf/cm² | |
| Spray method | Continuous spray + intermittent spray | |
| Effective inner volume of the test | 270L | |
| Interior dimension: WxHxD(mm) | 900*600*500 | |
| Carton size: WxHxD(mm) | 1400*850*1100 | |
| Box structure | ●The inner and outer boxes of the laboratory: the inner and outer boxes of the laboratory are made of grade A PVC polyvinyl board, the thickness of the whole machine is 8mm, and the acid and alkali resistance and temperature resistance to 78℃. ●Laboratory seal cover: The seal cover of the laboratory is made of grade A PVC plate, the thickness is 8mm, the surrounding reinforcement is 13mm, and the acid and alkali resistance and temperature resistance are 78℃ | |
| Open cover system | Manual opening | One-click automatic cover opening |
| Water refill method | Automatic/manual dual water supply mode, automatic water inlet with a set of water purifier | |
| Sample Stand | The laboratory basket frame adopts a plane indexing frame, the placing Angle is 15 degrees and 30 degrees, and on all sides the direction of falling fog and receiving fog is completely the same. | |
| Safety protection device | ●When the salt water is low, the heater power is automatically cut off ●When the temperature exceeds, the heater power supply is automatically cut off ●When the laboratory water level is low, the heater power supply is automatically cut off | |
| Power Supply | AC220;V50Hz;2.5KW | |
Applicable Standard:
GB/T242317-2008 salt spray test method
GB/T242318-2000 "Basic Regulations of Electrical and Electronic products Test Ka"
GB / T10125-1997 Artificial atmosphere corrosion test salt spray test
GB/T10587-2006 Technical conditions for salt spray test chamber
GB105932-1990 Method for measuring environmental parameters of electrical and electronic products
GB / T1765-1979 Paint film test for determination of resistance to heat, moisture, salt spray and weather (artificially accelerated)
GB/T242317-1993 "Electronic and electrical products basic environmental test procedures Test Ka: salt spray test method"
We provide technical support and service for our Salt Spray Test Chamber products. Our technical support team is available to answer any questions you may have about our products and their functionality. We can provide assistance with installation, troubleshooting, maintenance, and other product-related questions. We also offer a variety of service options, including on-site repair, calibration, and preventive maintenance.