Infinity Machine International Inc.
Machines are applied for big international labs, helping oversea customers establish quality control laboratory & send service team for installation.
Add to Cart
High Precision Cable Bending Testing Machine/Cable Testing Equipment for Headphone Line or USB Line
Model: RS-8116-6B
Purpose:
It is suitable for bending resistance test on headphone cable, USB cable, multicore cable conductor,flat cable and signal line,etc. The test method is as follows:Firstly, clamp one end of the wire rod and fasten it to the rotation clamp. Then have it make a horizontal rotation with hanging load to evaluate whether wire rod conduction is good after numerous test cycles.
Specification:
| Model | RS-8116-6B |
| Control system | It adopts Japanese OMRON ® touch screen and MTTSUBISHI ® PLC, and dach station works independently. |
| Impedance test module | It is equipped with impedance test module and Taiwan's THINGER color touch screen. |
| Drive | Six Japanese Panasonic ® AC servo motor |
| Reducer | Six Japanese Shimpo ® planctary for reducer |
| Test speed | 1～60rpm±0.5rpm |
| Test angle range | Commonly 0~±95° or 0~±180°, rotation angle of concentric jig is not limited. |
| The least angle display | 0.1° |
| Angle test accuracy | 0.2° |
| Test cycles range | 1～999,999 cycles |
| Batch pause interval | 1~10 minutes |
| Diameter of rotary disk | ∅210mm |
| Weights | 50g, 100g, 250g, 300g, 500g each 6pcs |
| Main unit dimension | W1820*D820*H1600mm |
| Control box dimension | W720*D500*H1700mm |
| Weight of machine | 450kg |
| Power | AC220V 50Hz 10A |
Features:
1.There are totally 6 slots, each of which adopts Japanese Panasonic® AC servo motor drive. They are positioned with high precision, with low noise and can be used for a long time. The test angle is ±1°. Eacg station adopts Japanese SHIMPO® planetary gear for slowing down with highly precise positioning.
2.It adopts Japanese OMRON® color touch screen controller as programming inputting and Japanese MITSUBISHI® PLC as control. There are Chinese and English interface which is easy for you to operate.
3.Test conditions are all set in the touch screen.(angle set, test speed, test cycles,finished test cycles, rotation interval time and certain minutes pause after certain test cycles.)
4.It is equipped with inpedance test module and adopts color touch screen to conduct online monitoring of conduction impedance.You can set the upper limit and lower limit impedance value of each station in the touch screen. Once the conduction impedance value exceeds set value in the test, the red light in the touch screen will send alarm and current station will stop testing.
